- Beijing Jinyehong Metallurgical Machanical Equipment Corp Ltd.
- bjmmec@yeah.net
- +86 15201347740/+86 13121182715
China Gold Supplier for Amrit Steel Rolling Mill - TC roll rings products for steel rolling mill machinery – Jinyehong
China Gold Supplier for Amrit Steel Rolling Mill - TC roll rings products for steel rolling mill machinery – Jinyehong Detail:
Product Introduction
cemented carbide roll rings (also known as tungsten carbide roll ring) possesses good thermal conduction property. Compared with other materials,it is much better in terms of heat-resistance, wear-resistance and strength. What ’s more,its hardness reduces a little under the condition of high temperature. So, the cemented carbide roll rings is invented with the ap-pearance of high speed wire rod mill.With the development and improvement, it is widely applied in the production of high speed wire, bar and deformed steel bar.
As far as the material for our products,there are two series as Wc-Co and Wc-Co-Ni-Cr which possess the good compre-hensive mechanical properties. The bending strength and impact toughness reach 2200 Mpa and(4-) x106J/ m’respectively.Its hardness and wear resistance come from tungsten carbide (Wc) while the toughness and strength depend on the binding agent (Co-Ni-Cr).At present, the finishing mill is generally composed of 8- 10 stands. Because of the big size of fracture surface of rolled part, the collar on the front stands of finishing mill may resist heavy duty and strong impact. Thus, the high hardness and good thermal fatigue resistance are the primary factors, which are prior to wear-resistance.While there is low load and impact for therear stands, we shall pay more attention to the wear-resistance and thermal fatigue resistance of roll rings. At present,the finishing mill is generally composed of 8- 10 stands.Because of the big size of fracture surface of rolled part, the collar on the front stands of finishing mill may resist heavy duty and strong impact. Thus, the high hardness and good thermal fatigue resistance are the primary factors, which are prior to wear-resistance. we shall pay more attention to the wear-resistance and thermal fatigue resistance of roll rings.
Description of Tc Ring
|
Rang of O.D.(mm) |
Rang of l.D.(mm) |
Rang of height(mm) |
|
145-450 |
87-280 |
62-150 |
Tungsten carbide roll
Range of outer diameter: 154-450mm
Range of inner diameter: 87-280mm
Range of height: 62-150mm
Table of Specification of Finished Rolls
|
Tolerances allowable for the O.D.,I.D, and Height of roll rings(mm) |
||||
|
TYPE |
OD≤200 mm |
OD > 200mm |
||
|
Better Grade |
Normal Grade |
Better Grade |
Normal Grade |
|
|
Tolerance of OD |
±0.020 |
±0.050 |
±0.030 |
±0.050 |
|
Tolerance of ID |
+0.020 |
+0.035 |
+0.025 |
+0.050 |
|
Tolerance of H |
±0.025 |
±0.100 |
±0.050 |
±0.100 |
| Main Grade for TC metal seal mechanical face ring with high density | ||||
| Grade | Density (g/cm³) | Hardness (HRA) | T.R.S(Mpa) | Application Recommended |
| YG4C | 15 | 89.5 | 1800 | Mainly used as small buttons for percussion bits and as the inserts of rotary prospecting bits to cut soft, medium-hard formations. |
| YG6 | 15.8 | 89.5 | 1700 | Mainly used as the buttons of small and medium-sized percussion bits and as the inserts of rotary prospecting bits to cut soft, medium-hard formations. |
| YG8 | 14.7 | 88.5 | 2300 | Mainly used as the buttons of small and medium-sized percussion bits and as the inserts of rotary prospecting bits to cut soft, medium-hard formations. |
| YG13C | 14.3 | 86 | 2500 | Mainly used as the inserts and buttons of tricone bits rotary-percussive bits and heavy rock drill bits to cut medium-hard and hard formations. |
| YG15 | 14 | 86.5 | 2500 | It is stronger, and is mainly used as the inserts and buttons of rotary-percussive bits, heavy rock drill bits to cut hard and very hard formations.v |
Packing & Delivery
Product detail pictures:
Related Product Guide:
continue on to further improve, to make sure product top quality in line with market and consumer standard requirements. Our firm has a excellent assurance program have already been established for China Gold Supplier for Amrit Steel Rolling Mill - TC roll rings products for steel rolling mill machinery – Jinyehong , The product will supply to all over the world, such as: Qatar, Maldives, Sheffield, As an experienced manufacturer we also accept customized order and we could make it the same as your picture or sample specification. The main goal of our company is to live a satisfactory memory to all the customers, and establish a long term business relationship with buyers and users all over the world.
By Eric from Ukraine - 2018.06.19 10:42
We have been appreciated the Chinese manufacturing, this time also did not let us disappoint,good job!
By Eric from Adelaide - 2018.12.28 15:18
